Announcement

Collapse
No announcement yet.

Badr 4 Coverage Maps (Footprints) Files

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Badr 4 Coverage Maps (Footprints) Files

    EADS Astrium and Arabsat, the communications satellite operator based in Riyadh, Saudi Arabia, have signed a contract for the construction of Arabsat’s fourth-generation satellites, designated Arabsat-4A and Arabsat-4B. Scheduled to enter service in 2006, the satellites will provide communications services over a wide area within the Middle East region.

    For this programme, EADS Astrium will team with Alcatel Space. EADS Astrium, as prime contractor for Arabsat-4, will design and build the spacecraft, supply the platforms, upgrade the Arabsat ground control centres and deliver the spacecraft in orbit on behalf of ARABSAT. Alcatel Space will supply the payloads. Arabsat 4A will carry 24 active channels in C-band and 16 active Ku-band channels and Arabsat 4B will have a payload of 28 active Ku-band channels. Both satellites will have a launch mass of around 3.3 tonnes and a 15-year design life.

    The Arabsat-4 spacecraft are based on the Eurostar-2000+ version of the Eurostar satellite family. Both satellites received the names Badr-1 and Badr-4 respectively in February 2006.

    Badr 1 did not reach its planned orbit, when the upper stage of the Proton-M Briz-M (Ph.3) launch vehicle failed. After evaluating a lunar fly-by maneuvre to rescue the satellite, Badr 1 was deorbited on 24.03.2006 over the pacific.

    In June 2006, the third satellite of this series was ordered as a replacement for the lost Badr 1 and designated Badr 6 (Arabsat 4AR).

    1. BSS Ku-band Beam
    badr4_bss_ku.jpg

    2. FSS Ku-band Beam

    badr4_fss_ku.jpg

    3. MBC Ku-band Beam
    badr4_v_ku.jpg
Working...
X